Atlas Dust Sensor
Atlas Dust Sensor
The Atlas dust sensor has two (2) dust channels, instanteous and 2 rolling average channels. The sensor handles all of the rolling average calculations as well as all alarming functions for all dust channels, including alarm delays. Each rolling average periods and alarm setting for each channel is independently configurable. All you have to do is read the data registers.
Team the Atlas with one of our interface controllers and you have one of the most powerful compliance and diagnbostic tools on the market. The Interface Controller can store and back-up data to a UCB drive so you can easily grab the history to help identify process changes or use the data to EPA MACT reporting.
| Parameter | Description / Value |
|---|---|
| Measurement Principle | Dynamic Induction |
| Measurement Range | Detection Limit < 0.1 mg/m3 Max Several g/m3, depending on conditions |
| Enclosure | Stainless Steel (IP65 / Nema 4X) |
| Communication Interfaces |
1 x serial communications RS485 |
| Communication Protocol | Modbus RTU |
| Analog Output | Only with a Controller |
| Dust Channels | Instantaneous (1-sec Avg) and 1 RA dust channel |
| Alarming | Alarm limits and delays for all dust channels |
| Self-Checks | Automated |
| Self-Check Functions | Electronic Drift Check (EDC) Rod Isolation Check (RIC) (US Patent 9482706B2) |
| Parameter | Description / Value |
|---|---|
| Measurement Range | Detection Limit < 0.1 mg/m3 Max Several g/m3, depending on conditions |
| Enclosure | Stainless Steel (IP65 / Nema 4X) |
| Weight | 7.0 lbs (3.2 kg) (without the rod) |
| Dimensions (without rod) |
7″ x 11″ x 5″ 178mm x 280mm x 127mm (W x H x D) |
| Ambient Temperature | -40 C to +70 C (-40 F to 158 F) |
| Power Supply | 24 VDC |
| Power Consumption | Less than 5 Watts |
| Communication Interfaces |
1 x serial communications RS485 |
| Communication Protocols | Modbus RTU |
| Process Temperature | Default 200 C (392 F) Optionally up to 1600 F (871 C) |
| Process Pressure | Default 3000 psi (20684 kPa) |
| Process Humidity | Max 95% RH (non-condensing) |
| Self-Checks | Automated |
| Self-Check Functions | Electronic Drift Check (EDC) Rod Isolation Check (RIC) (US Patent 9482706B2) |
